A good skull assortment for a shop usually rests on one core design in several stones, a few character designs for variety, and one or two larger focal pieces. As of November 2026, our wholesale crystal skulls collection lists 13 skull designs in 58 stones, with recorded sample sizes from about 1.5 in to 15.4 in, measured on the longest side. This guide breaks that range down by design, size and stone, and shows how minimums shape a first order.
The 13 skull designs, side by side
The realistic human skull carries the range: it is listed in 53 of the 58 stones and covers almost the full size span. The other twelve designs are either small character pieces offered in several stones, or one-stone sculptural pieces.
| Design | Stones listed | Recorded sizes | What to know when buying |
|---|---|---|---|
| Realistic human skull | 53 | 2.2–15.4 in | The core design. Recorded in blue chalcedony, rose quartz, black obsidian, red jasper, amazonite, labradorite and dozens more. |
| Dragon skull | 15 | 2–3 in | A crest of spikes along the back of the head. All recorded samples are 2–3 in. |
| Elf alien skull | 11 | 1.5–3.9 in | The smallest skull in the range, and one of two designs offered in terahertz, a man-made material. |
| Raven skull | 8 | 2.8–5 in | A long, pointed beak. Stones include blue chalcedony, Angolan quartz, dragon blood jasper and tiger iron. |
| Geode skull | 7 | 2.1–9.8 in | Cut from geode and druzy stones (agate, amethyst, quartz druse and others) with an open crystal pocket, so no two match. |
| Phoenix skull | 6 | 2.5–3.6 in | A bird head with a hooked beak and a swept-back crest, in rose quartz, amazonite, flower agate and others. |
| Punk skull | 3 | 2.7–3.7 in | A row of tall spikes on top. Black obsidian, blue chalcedony and red jasper. |
| Mayan alien skull | 3 | 3.9 in | An elongated skull. Amethyst and red jasper among the stones. |
| Eagle & skull | 1 | 7.2 in | An eagle head carved over a human skull, in amethyst druse agate. |
| Winged skull | 1 | 7.1 in | A horned skull with feathered wings, in black obsidian. |
| Horned geode skull | 1 | 6 in | A horned skull in quartz druse material. |
| Lizard & skull | 1 | 6.1 in | A chameleon on a branch above a skull. |
| Snake & skull | 1 | 5 in | A snake coiled over the top of a skull. |
Across all 13 designs there are 269 recorded design, stone and size combinations. Measured on the longest side, 12 are 2 in or under, 164 are over 2 in and up to 4 in, 56 are over 4 in and up to 6 in, and 37 are over 6 in. The skull catalog itself (July 2026, US edition, available on request) runs from about 0.8 in pendants to 16 in, and also includes skulls with an octopus or owl, pterosaur heads and lion heads that are not shown on this site. For how sizes compare across the whole range, see our crystal carving size guide.

How minimums work when you mix designs and stones
Minimums apply per catalog item, meaning one design in one stone and one size, and they step down as size goes up. In our current skull catalog they are typically 10 pieces per design for carvings up to about 3–4 in, 5 pieces around 4.5–5 in, 2 pieces at 6–8 in, and single pieces for large one-off carvings. Your quotation confirms the minimum for each item.
That has a practical effect on assortment planning. Most of the range sits at the small sizes, where minimums are highest, while a 7 in focal skull typically adds only 2 pieces. If you want one small design in several stones, each stone is a separate item with its own minimum, so list the stones and quantities in your inquiry.
Here is how a first skull order might be built using those typical minimums:
| Role | Example item | Typical minimum per item |
|---|---|---|
| Core design | Realistic human skull, about 2–3 in, in each of the stones you sell most | 10 pcs per stone |
| Character piece | Dragon skull, about 3 in | 10 pcs |
| Character piece | Raven skull, about 3.5 in | 10 pcs |
| Mid-size anchor | Raven or human skull, about 5 in | 5 pcs |
| Focal piece | Human or winged skull, about 7 in | 2 pcs |
Treat this as a planning sketch, not a package we sell: designs, stones, sizes and minimums are all confirmed in your quotation.
Which stones suit skull carvings
A skull is a smooth dome with deep recesses (eye sockets, nasal cavity, teeth), so the stone has a large effect on how the form reads. The stones that appear across the most skull designs in our range are blue chalcedony and red jasper (6 designs each), rose quartz (5), and amazonite, Angolan quartz, black obsidian, leopard skin jasper and yooperlite (4 each).
- Chalcedony and agate. Microcrystalline quartz, around 7 on the Mohs scale, and described by the International Gem Society as a tough gemstone that is usually cabbed or carved. On translucent material, light passes into the eye sockets and teeth, which makes the carved depth easier to see.
- Crystalline quartz (rose quartz, Angolan quartz, amethyst). Also 7 on the Mohs scale, but made of larger crystals; internal fractures can show as cloudy veils, which some buyers like on a skull and others do not. Ask for photos if clarity matters to you.
- Jasper and other opaque patterned stones. Red jasper takes a bright polish, and the pattern sits on the surface. On a small skull, a busy pattern can compete with the carved features, so patterned stones often work better at 3 in and up.
- Black obsidian. Natural volcanic glass, about 5–5.5 on the Mohs scale (the International Gem Society lists 5, Geology.com about 5.5). Geology.com notes it is relatively easy to carve but lacks toughness and chips on impact. It gives the darkest, most reflective skulls, and needs careful packing.
- Geode and druzy material. The crystal pocket is part of the design. Its size, color and position change from piece to piece, so ask for photos of the actual pieces if you sell them online.
How rough stone is sorted, cut and carved at our factory is shown step by step on the craftsmanship page.
Detail, fragility and display
The parts that make a skull design distinctive are usually the parts that break: the raven's beak, the dragon's horn crest, the punk skull's spikes and the wings on the winged skull. Three habits reduce losses:
- Tell us your packaging requirements up front, especially for designs with long projections.
- Keep softer or more brittle stones, such as obsidian, out of open bins where pieces knock together.
- Use closed cases or high shelves for one-off focal pieces.
Dimensions and weights refer to recorded samples; production dimensions, tolerances, finish, packaging and availability are confirmed with your quotation. Photos or video of finished pieces are available for approval on request.
Custom skulls and private designs
If a design is not in the range, or you want an existing design in a different stone or size, we take custom and OEM/ODM carving from your drawings or reference photos. The custom crystal carving page explains what to send. For account setup and ordering, see the wholesale program.
